Take the power with you. Brings your batteries back to their proper charge quickly and conveniently. Offers recovery time of 4-6 hours. 7" length x 9" width x 7-3/4" height. Weighs just 6.5 pounds.
Fully automatic 3-stage charging (bulk, absorption and maintenance) so you get a full charge every time. LED display indicates power ON, charging, full charge and check connection. Short circuit and reverse polarity protection prevents the charger from operating if improperly connected to the battery – a real safety feature. For use with 12V/6-cell batteries (50-130 amp hour rating) that are flooded/wet cell, maintenance free or starved electrolyte only. FCC compliant. UL listed to standard 1236. 3-year warranty.

Offers the fastest charge times available. A super-charged replacement for an existing unit, they use the same footprint as other popular original equipment chargers. No new drilling or holes required. Fully automatic 3-stage charging (bulk, absorption and maintenance) For use with 12V/6-cell batteries (50-130 amp hour rating) that are flooded/wet cell, maintenance free or starved electroyte (AGM) only. Waterproof, shock-and vibration-resistant construction. Saltwater tested and fully resistant to corrosion. Short circuit, reverse polarity and ignition protected. FCC compliant, UL Listed to 1236 standard.

Offers the fastest charge times available. A super-charged replacement for an existing unit, they use the same footprint as other popular original equipment chargers. No new drilling or holes required. Fully automatic 3-stage charging (bulk, absorption and maintenance) For use with 12V/6-cell batteries (50-130 amp hour rating) that are flooded/wet cell, maintenance free or starved electroyte (AGM) only. Waterproof, shock-and vibration-resistant construction. Saltwater tested and fully resistant to corrosion. Short circuit, reverse polarity and ignition protected. FCC compliant, UL Listed to 1236 standard.

Offers the fastest charge times available. A super-charged replacement for an existing unit, they use the same footprint as other popular original equipment chargers. No new drilling or holes required. Fully automatic 3-stage charging (bulk, absorption and maintenance) For use with 12V/6-cell batteries (50-130 amp hour rating) that are flooded/wet cell, maintenance free or starved electroyte (AGM) only. Waterproof, shock-and vibration-resistant construction. Saltwater tested and fully resistant to corrosion. Short circuit, reverse polarity and ignition protected. FCC compliant, UL Listed to 1236 standard.

Designed for charging up to 250 amp hour batteries - perfect for boats, autos, personal watercraft, ATVs, garden tractors or any other equipment uses a 12 volt battery. Will not overcharge or damage batteries if left connected for extended periods. Batteries will maintained per the manufacturers’ instructions. Fully automatic, does not drain battery if ACis off. Reverse polarity protected. LEDsignifies proper operation current limiting over temperature protection. Includes mounting ears, AC cord and 5¢ DC output wires.

The ideal way to keep your marine batteries charged and ready during prolonged periods of inactivity. 2 banks at 3 amps per bank output. With a maintainer on-board, you’ll keep your deep cycle and starting batteries in good working order and ready to go.

State of the art in battery charging. Independent control of  the 3 outputs allows each battery bank to be in a different state of charge simultaneously, and accommodates a different battery type on each channel. Overcharging is eliminated. Universal line voltage input and power factor correction provide efficient use of AC power anywhere in the world and allow the unit to deal effectively with poor power conditions. Includes digital remote display and a battery temperature sensor.

State of the art in battery charging. Independent control of  the 3 outputs allows each battery bank to be in a different state of charge simultaneously, and accommodates a different battery type on each channel. Overcharging is eliminated. Universal line voltage input and power factor correction provide efficient use of AC power anywhere in the world and allow the unit to deal effectively with poor power conditions. Includes digital remote display and a battery temperature sensor.

Perfect for small boat and PWC charging. Its unique circuit senses when the battery is fully charged and automatically reduces current flow to supply only a maintenance charge to keep the battery fresh. The safe float voltage lets you leave it on indefinitely without damage to the batteries. Designed for charging 12v flooded or gel cell batteries rated between 5 & 250 amp hours. Input voltage: 100-130v AC/50-60Hz. Waterproof. Two year warranty.

For off-season storage and maintenance of fully charged batteries in boats, PWC, snowmobiles, ATVs, etc. Keeps your batteries factory fresh without overcharging of boiling electrolyte. It supplies only the maintenance charge necessary to preserve battery life. Maintains 12v flooded or gel cell battery rated between 5 and 125 amps hours. Input voltage: 100-130v AC/60Hz.

Made specifically for a coastal blue water environment. “Smart Leg” system automatically delivers the power necessary to optimize your battery recharge cycle. It provides a dedicated output per battery so that each battery receives individual attention. The electronics are encased in a fully sealed, ignition protected package, impervious to moisture, vibration, caustic battery gases. Waterproof, shockproof, vibration proof. Compact, Lightweight.

Made specifically for a coastal blue water environment. “Smart Leg” system automatically delivers the power necessary to optimize your battery recharge cycle. It provides a dedicated output per battery so that each battery receives individual attention. The electronics are encased in a fully sealed, ignition protected package, impervious to moisture, vibration, caustic battery gases. Waterproof, shockproof, vibration proof. Compact, Lightweight.

Made specifically for a coastal blue water environment. “Smart Leg” system automatically delivers the power necessary to optimize your battery recharge cycle. It provides a dedicated output per battery so that each battery receives individual attention. The electronics are encased in a fully sealed, ignition protected package, impervious to moisture, vibration, caustic battery gases. Waterproof, shockproof, vibration proof. Compact, Lightweight.

Waterproof. For One 12V battery. Features: automatic reset after short or overload, automatic thermal shutdown, reverse polarity protection. Water-resistant for wet locations. Lightweight, silent and fully automatic. Silently and rapidly recharge and then individually maintain separate battery banks simultaneously. LED indicators show state of charge.

Charges auxiliary or starting batteries from your inverter/charger with limited voltage drop. 15 A maximum charge current, automatically adjusts for 12 or 24 volt battery banks, automatically switches on/off without affecting the battery bank or over-charging. Other features include built-in thermal and over-current protection, reverse polarity protection and easy three wire installation.

When you want the very best onboard charger, choose these Marine UL listed units. The only Marine UL chargers with a battery type selector switch allowing you to charge Lead Acid, Gel or AGM batteries. Tested for durability against impact, vibration, temperature and shock. Features 3-stage charging with temperature compensation that restores up to 3 banks simultaneously. These units can also act as a power supply providing constant voltage to DC components such as bilge pumps or DC lighting. Ignition and reverse-polarity protected. Designed with corrosion resistant components, a heavy-duty enclosure and heat sink for durability in the marine environment. Run cool and quiet. Anodized aluminum housing. Easy to install and service.

When you want the very best onboard charger, choose these Marine UL listed units. The only Marine UL chargers with a battery type selector switch allowing you to charge Lead Acid, Gel or AGM batteries. Tested for durability against impact, vibration, temperature and shock. Features 3-stage charging with temperature compensation that restores up to 3 banks simultaneously. These units can also act as a power supply providing constant voltage to DC components such as bilge pumps or DC lighting. Ignition and reverse-polarity protected. Designed with corrosion resistant components, a heavy-duty enclosure and heat sink for durability in the marine environment. Run cool and quiet. Anodized aluminum housing. Easy to install and service.

When you want the very best onboard charger, choose these Marine UL listed units. The only Marine UL chargers with a battery type selector switch allowing you to charge Lead Acid, Gel or AGM batteries. Tested for durability against impact, vibration, temperature and shock. Features 3-stage charging with temperature compensation that restores up to 3 banks simultaneously. These units can also act as a power supply providing constant voltage to DC components such as bilge pumps or DC lighting. Ignition and reverse-polarity protected. Designed with corrosion resistant components, a heavy-duty enclosure and heat sink for durability in the marine environment. Run cool and quiet. Anodized aluminum housing. Easy to install and service.

When you want the very best onboard charger, choose these Marine UL listed units. The only Marine UL chargers with a battery type selector switch allowing you to charge Lead Acid, Gel or AGM batteries. Tested for durability against impact, vibration, temperature and shock. Features 3-stage charging with temperature compensation that restores up to 3 banks simultaneously. These units can also act as a power supply providing constant voltage to DC components such as bilge pumps or DC lighting. Ignition and reverse-polarity protected. Designed with corrosion resistant components, a heavy-duty enclosure and heat sink for durability in the marine environment. Run cool and quiet. Anodized aluminum housing. Easy to install and service.

When you want the very best onboard charger, choose these Marine UL listed units. The only Marine UL chargers with a battery type selector switch allowing you to charge Lead Acid, Gel or AGM batteries. Tested for durability against impact, vibration, temperature and shock. Features 3-stage charging with temperature compensation that restores up to 3 banks simultaneously. These units can also act as a power supply providing constant voltage to DC components such as bilge pumps or DC lighting. Ignition and reverse-polarity protected. Designed with corrosion resistant components, a heavy-duty enclosure and heat sink for durability in the marine environment. Run cool and quiet. Anodized aluminum housing. Easy to install and service.

When you want the very best onboard charger, choose these Marine UL listed units. The only Marine UL chargers with a battery type selector switch allowing you to charge Lead Acid, Gel or AGM batteries. Tested for durability against impact, vibration, temperature and shock. Features 3-stage charging with temperature compensation that restores up to 3 banks simultaneously. These units can also act as a power supply providing constant voltage to DC components such as bilge pumps or DC lighting. Ignition and reverse-polarity protected. Designed with corrosion resistant components, a heavy-duty enclosure and heat sink for durability in the marine environment. Run cool and quiet. Anodized aluminum housing. Easy to install and service.

When you want the very best onboard charger, choose these Marine UL listed units. The only Marine UL chargers with a battery type selector switch allowing you to charge Lead Acid, Gel or AGM batteries. Tested for durability against impact, vibration, temperature and shock. Features 3-stage charging with temperature compensation that restores up to 3 banks simultaneously. These units can also act as a power supply providing constant voltage to DC components such as bilge pumps or DC lighting. Ignition and reverse-polarity protected. Designed with corrosion resistant components, a heavy-duty enclosure and heat sink for durability in the marine environment. Run cool and quiet. Anodized aluminum housing. Easy to install and service.

An excellent choice for value-priced, high performance DC charging. Include a battery type selector switch allowing you to charge Lead Acid, Gel or AGM batteries. Features include 3-stage charging of up to 3 banks simultaneously, ability to act as a power supply, ignition and reverse-polarity protected, corrosion resistant components and housing. Easy to install and service, not Marine UL listed. 2000 Series. Anodized aluminum housing. Size": 3.7 x 9.5 x 10.5. Made in the USA. Mfr's 5-yr limited warranty.

An excellent choice for value-priced, high performance DC charging. Include a battery type selector switch allowing you to charge Lead Acid, Gel or AGM batteries. Features include 3-stage charging of up to 3 banks simultaneously, ability to act as a power supply, ignition and reverse-polarity protected, corrosion resistant components and housing. Easy to install and service, not Marine UL listed. 2000 Series. Anodized aluminum housing. Size": 3.7 x 9.5 x 10.5. Made in the USA. Mfr's 5-yr limited warranty.

An excellent choice for value-priced, high performance DC charging. Include a battery type selector switch allowing you to charge Lead Acid, Gel or AGM batteries. Features include 3-stage charging of up to 3 banks simultaneously, ability to act as a power supply, ignition and reverse-polarity protected, corrosion resistant components and housing. Easy to install and service, not Marine UL listed. 2000 Series. Anodized aluminum housing. Size": 3.7 x 9.5 x 10.5. Made in the USA. Mfr's 5-yr limited warranty.

An excellent choice for value-priced, high performance DC charging. Include a battery type selector switch allowing you to charge Lead Acid, Gel or AGM batteries. Features include 3-stage charging of up to 3 banks simultaneously, ability to act as a power supply, ignition and reverse-polarity protected, corrosion resistant components and housing. Easy to install and service, not Marine UL listed. 2000 Series. Anodized aluminum housing. Size": 3.7 x 9.5 x 10.5. Made in the USA. Mfr's 5-yr limited warranty.