The small size with big illumination makes this an ideal way to shed some light on your cockpit. Mounts easily on exterior bulkheads or under the hardtop. Miniature 12-volt, 125 CP sealed beam draws 1.7 amps.

Chrome plated zinc alloy. Shield swivels to change position. 12 volt, 7 watt bulb included. Use spare bulb # 337011DP. Screw size 6.

Linen-look shade. Bulb included.

Linen-look shade. Bulb included.

Chrome plated zinc alloy. For systems up to 50 volts. Medium screw socket. Turn switch. Bulb not included.

Molded plastic. For systems up to 50 volts. Has double contact bayonet socket. Will accommodate a bulb up to 24 watts. Bulb not included. #8 screw.

Molded plastic. For systems up to 50 volts. Has double contact bayonet socket. Will accommodate a bulb up to 24 watts. Bulb not included. #8 screw.

Chrome plated plastic hood. Plastic base plate.
Dimensions: 2-1/2" x 1-3/16" x 1"(6.35cm x 3.02cm x 2.54cm). Fasten with #8 screws.

Use as a 12 volt courtesy or step light for low level general illumination. Compact, low profile housing is chrome plated over molded ABS housing. Flush mounts on 2-11/16" centers with a separate ground lead wire.

Color: Black. Fastener # 6 FH.

Includes 12V-3W bulb.
Dimensions: 2-1/4" x 2-1/4" x 13/16" (5.72cm x 5.72cm x 2.06cm).
Installed in 1-3/4" diameter opening.

Includes 12V-3W bulb.
Dimensions: 2-1/4" x 2-1/4" x 13/16" (5.72cm x 5.72cm x 2.06cm).
Installed in 1-3/4" diameter opening.

Injection molded polycarbonate. Light is secured by screwing mounting ring from the back to the surface. Features a low profile and 12" leads. Includes gasket and integral molded lens allowing it to be used as a live well light, etc.

Injection molded polycarbonate. Light is secured by screwing mounting ring from the back to the surface. Features a low profile and 12" leads. Includes gasket and integral molded lens allowing it to be used as a live well light, etc.

With snap on front cover that conceals mounting screws. Molded plastic. Diffusion lens. 12 volt, 3 watt bulb included. Installs in a 1-3/4" diameter hole. Supplied with 1/4" spade connectors. Use spare bulb # 1044DP99A.

With snap on front cover that conceals mounting screws. Molded plastic. Diffusion lens. 12 volt, 3 watt bulb included. Installs in a 1-3/4" diameter hole. Supplied with 1/4" spade connectors. Use spare bulb # 1044DP99A.

With snap on front cover that conceals mounting screws. Molded plastic. Diffusion lens. 12 volt, 3 watt bulb included. Installs in a 1-3/4" diameter hole. Supplied with 1/4" spade connectors. Use spare bulb # 1044DP99A.

Highly polished, chrome plated brass unit is hooded to shield against upward glare. Surface mount on 2" centers with separate ground wire. Mounting screws included.

Surface mount interior light features a durable Lexan^® lens and nylon on/off switch. Unit mounts on 3 1/2" centers and a separate ground wire is supplied for mounting on non-metallic surfaces.

Are energy efficient and directly replace many incandescent light bulbs aboard boats and RV's. At just 0.068 amps, they draw little current on your 12-volt system, generate no heat, and last for over 100,000 hours. Use for reading, engine room lighting, or as courtesy lights, etc. Note: LED Clusters are not suited as replacements for running light bulbs. Double contact. White LED.

Handy light with many uses! Includes a key ring.

Perfect lighting for low current, all weather submersible applications. For thru-hull mounting on livewells and bulkheads. Simple to install. Cool to the touch. One LED for low current draw. Operates on 9-16 Volts DC. One piece molded housing, waterproof gasket, and tightening nut. Max wall thickness 3/4". Installation hole size is 7/8".

Perfect lighting for low current, all weather submersible applications. For thru-hull mounting on livewells and bulkheads. Simple to install. Cool to the touch. One LED for low current draw. Operates on 9-16 Volts DC. One piece molded housing, waterproof gasket, and tightening nut. Max wall thickness 3/4". Installation hole size is 7/8".

Perfect lighting for low current, all weather submersible applications. For thru-hull mounting on livewells and bulkheads. Simple to install. Cool to the touch. One LED for low current draw. Operates on 9-16 Volts DC. One piece molded housing, waterproof gasket, and tightening nut. Max wall thickness 3/4". Installation hole size is 7/8".

Totally waterproof and virtually indestructible. Great for underwater mounting in a livewell or any other potentially wet area. Unit is molded of clear acrylic. The bulb and socket pops in from behind. Mounts like a thru-hull fitting.