3dB center-fed 1/2 wave coaxial sleeve. Designed to reduce signal fading in rough seas. This is probably the most widely used antenna on Coast Guard Vessels. Brass and copper elements, Chrome-plated brass ferrule with standard 1"-14 thread, includes 15' RG-58 cable and a PL-259 connector. One section. Suggested mount: 4187 (ratchet mount).

Center-fed 1/2 wave coaxial sleeve. A great basic 3dB antenna for day-to-day cruising in calm to moderate seas. The antenna has an integral polycarbonate Lift-n-Lay mount for deck mounting, and comes with a leveling plate and installation hardware. Brass and copper elements, includes 15' RG-58 cable and a PL-259 connector. One section.

Phased 1/2 wave elements in a collinear array with choking sleeve to suppress cable radiation. 9dB gain. This highly sophisticated design is outstanding for long distance communications. Extra rugged. Brass and copper elements, stainless ferrule with standard 1"-14 thread, includes 20' RG-8/X cable and a PL-259 connector. Two sections: base 105", tip 105". Suggested mount: 409 or 410 mounting kit.

End-fed with matching stub. 6dB gain. This antenna delivers not only performance, but superb value. The best of the high-end features in an 8' antenna with a brass element and a smooth, high gloss, polyurethane finish that won't turn yellow in the sun. Brass and copper elements, chrome-plated brass ferrule with standard 1"-14 thread, includes 15' RG-58 cable and a PL-259 connector. One section. Suggested mount: 4187 ratchet or use a 410 mounting kit plus a 4008 extension mast to form a 16' antenna system. 1501BULK: 25 per case pack.

End-fed with matching stub. 6dB gain. This antenna delivers not only performance, but superb value. The best of the high-end features in an 8' antenna with a brass element and a smooth, high gloss, polyurethane finish that won't turn yellow in the sun. Brass and copper elements, chrome-plated brass ferrule with standard 1"-14 thread, includes 15' RG-58 cable and a PL-259 connector. One section. Suggested mount: 4187 ratchet or use a 410 mounting kit plus a 4008 extension mast to form a 16' antenna system. 1501BULK: 25 per case pack.

Collinear phased 5/8 wave. 6dB gain. High-gloss, polyurethane finish that won't turn yellow in the sun. Brass and copper elements, chrome-plated brass ferrule with standard 1"-14 thread, includes 15' RG-58 cable and a PL-259 connector. One section. Suggested mount: 4187 ratchet.

Collinear phased 5/8 wave. 6dB gain. A favorite of maritime professionals, this rugged antenna boasts an extra heavy-duty radome and powerful internal elements for reliable service day after day under the most demanding conditions. Brass and copper elements, chrome-plated brass ferrule with standard 1"-14 thread, includes 20' RG-58 cable and PL-259 connector. One section. Twin to: 5205 and 5207 CB antennas. Suggested mount: 4187 ratchet, or use 410 mounting kit plus 4008 extension mast to form a 16' antenna system.

End-fed with matching stub. An economical and lightweight, self-supporting antenna for good communications where range is not the predominant factor. Quality copper cable elements, ferrule with standard 1"-14 thread, includes 15' RG-58 cable and PL-259 connector. 6dB gain, One section. 5206C:Suggested mount: 4187 ratchet mount or use a 410 mounting kit and a 4008 extension mast to form a 16' antenna system.

End-fed with matching stub. An economical and lightweight, self-supporting antenna for good communications where range is not the predominant factor. Quality copper cable elements, ferrule with standard 1"-14 thread, includes 15' RG-58 cable and PL-259 connector. 6dB gain, One section. 5206C:Suggested mount: 4187 ratchet mount or use a 410 mounting kit and a 4008 extension mast to form a 16' antenna system.

End-fed with matching stub. An economical and lightweight, self-supporting antenna for good communications where range is not the predominant factor. Quality copper cable elements, ferrule with standard 1"-14 thread, includes 15' RG-58 cable and PL-259 connector. 6dB gain, One section. 5206C:Suggested mount: 4187 ratchet mount or use a 410 mounting kit and a 4008 extension mast to form a 16' antenna system.

End-fed with matching stub. An economical and lightweight, self-supporting antenna for good communications where range is not the predominant factor. Quality copper cable elements, ferrule with standard 1"-14 thread, includes 15' RG-58 cable and PL-259 connector. 6dB gain, One section. 5206C:Suggested mount: 4187 ratchet mount or use a 410 mounting kit and a 4008 extension mast to form a 16' antenna system.

End-fed 1/2 wave. A favorite with sailboat owners, this light weight, low profile, stainless steel antenna was specially designed for masthead mounting. Hermetically sealed, tin-plated copper wire coil. Stainless steel body and whip. SO-239 connector. Mount: stainless steel "L" bracket supplied. The 5215CX shares the same features but comes with 60' RG-8/X low-loss cable and PL-259 connectors.

End-fed 1/2 wave. A favorite with sailboat owners, this light weight, low profile, stainless steel antenna was specially designed for masthead mounting. Hermetically sealed, tin-plated copper wire coil. Stainless steel body and whip. SO-239 connector. Mount: stainless steel "L" bracket supplied. The 5215CX shares the same features but comes with 60' RG-8/X low-loss cable and PL-259 connectors.

An enhanced version of the famous 5225-XT, the 5225-XP features silver-plated element for extended performance. Comes with high-gloss, white, polyurethane finish, stainless steel ferrule, 20' of RG-8X coax and PL-259 connector. 6db gain.

Collinear-phased 5/8 wave elements. 6dB gain. The 5225XT is Shakespeare's classic 5225 in a new, stronger, stiffer radome. It's extra tough for use on hard tops, T-tops, radar arches, or wherever its extra resistance to high winds and high speeds is welcome. Brass and copper elements, stainless steel ferrule with standard 1"-14 thread, 20' RG-8/X low-loss cable plus a PL-259 connector.

5/8 Wave over 1/2 wave dipole. 8dB gain. The ultra-performer, the most effective 8dB antenna system available, thanks to its increased signal capture area. Brass and copper elements, stainless steel ferrule with standard 1"-14 thread, includes 20' RG-8/X cable and PL-259 connector. Two sections: base 94", tip 74". Suggested mount: 409 or 410 mounting kit.

End-fed 1/2 wave. The perfect choice for bassboats, center consoles, or any vessel where compact size is important. Chrome plated brass canister minimizes de-tuning. Sealed, tin-plated copper wire coil. Requires mount with center hole for passage of the supplied 15' RG-58 cable. PL-259 connector included. Suggested mounts: 4187, 4188-S, or 4190. The 5241R is the same as style 5240, but with a heavy-duty stainless steel whip, for extra stability at high speeds.
Stainless Steel Whip (36").

End-fed 1/2 wave. The perfect choice for bassboats, center consoles, or any vessel where compact size is important. Chrome plated brass canister minimizes de-tuning. Sealed, tin-plated copper wire coil. Requires mount with center hole for passage of the supplied 15' RG-58 cable. PL-259 connector included. Suggested mounts: 4187, 4188-S, or 4190. The 5241R is the same as style 5240, but with a heavy-duty stainless steel whip, for extra stability at high speeds.
Stainless Steel Whip (36").

End-fed 1/2 wave. The perfect choice for bassboats, center consoles, or any vessel where compact size is important. Chrome plated brass canister minimizes de-tuning. Sealed, tin-plated copper wire coil. Requires mount with center hole for passage of the supplied 15' RG-58 cable. PL-259 connector included. Suggested mounts: 4187, 4188-S, or 4190. The 5241R is the same as style 5240, but with a heavy-duty stainless steel whip, for extra stability at high speeds.
Stainless Steel Whip (36").

End-fed 1/2 wave. A 3dB base antenna with a 36" stainless steel whip that Lift-n-Lays down, out of the way, for trailering, storage, etc. Sealed copper wire coil. Mounts by passing the SO-239 connector through horizontal surfaces up to 1/2" thick. Coax and PL-259 connector not supplied.

Collinear phased 5/8 wave with two coaxial chokes to suppress cable radiation. 6dB gain. This professional quality antenna is a performance powerhouse. It's extra strong - sturdy enough to be self-supporting, even in high winds and high speeds. Brass and copper elements, stainless steel ferrule with standard 1"-14 thread, 20' RG-8/X low-loss cable plus a PL-259 connector. Two sections: base 75", tip 39". Suggested mount: use only 4187-HD ratchet mount for self-supporting applications, or use 452 mounting kit if an upper support bracket installation is preferred.

An enhanced version of the famous 5400-XT, the 5400-XP features a silver-plated element for extended performance. Comes with high-gloss, white, polyurethane finish, stainless steel ferrule, 20' of RG-8X coax and PL-259 connector. 3db gain.

Center-fed 1/2 wave coaxial sleeve. 3dB gain. Heavy-duty construction for general purpose communications. It's at home on T-tops, Hard-tops and other positions aloft, where its small size can deliver maximum range. Brass and copper elements, stainless steel ferrule with standard 1"-14 thread. Includes 20' RG-8/X cable and PL-259 connector. Suggested mount: 4187.

Emergency VHF flex antenna, loaded 1/4 wave whip. Comes packed in a 12" weather resistant plastic tubing. Complete with 12' cable, connector, and rubber suction cup for fast mounting to any smooth horizontal surface. Flexible vinyl outer covering.

This light-weight, black VHF Marine antenna is specially built for sailboat racers. Its 15” center-loaded design delivers Unity Gain, and it comes with
a black L-bracket for mounting. Its connector is gold-plated. Stainless
steel whip.

Same features as the 5206C, but with an attractive black finish. Suggested mount: 4187.

Excellent VHF, cellular and PCS communication in one 8' antenna. Strong signal pulling power with 9dB gain for cellular and PCS, and 5dB gain for VHF. Stainless steel ferrules, High-gloss urethane finish, Powerful brass radiators. Includes two 20' exclusive low loss, foil shielded, UV stable RG-8X marine cables and PL-259 adapter for VHF and double male mini-UHF adapter for cellular.

Available in either a top or side mount, or combination of both, this antenna features a flexible 16” mast and 54” cable. Available in black or white.

Available in either a top or side mount, or combination of both, this antenna features a flexible 16” mast and 54” cable. Available in black or white.